GLACE - Toluene Based Surface Printing Inks for LDPE Films
GLACE SERIES
Polyamide Based Inks Series for Surface Printing on LDPE Film
Printing Process : Gravure Printing
Applications : Water & Milk Pouches
Substrates : Treated LDPE (Minimum required treatment 38 mN/m = dynes/cm)
Special Characteristic
- Excellent Printability and Re-Solubility
- Excellent Wet & Dry Rub Resistance
- Excellent Scuff and Nail Resistance
- Very Good Water and Milk Resistance
- Very Good Adhesion on Treated Substrate
Properties
| Ink Adhesion | 8 to 9 |
| Gloss | 8 to 9 |
| Nail & Scuff Resistance | 8 to 9 |
| Water Resistance | 8 to 9 |
| Deep Freeze Resistance | 8 to 9 |
| Vegetable Oil Resistance | Not Applicable |
Rating Scale 1 = Poor, 10 = Excellent
| Light Fastness (Blue Wool Scale) | 2 to 8 |
| Heat Resistance | 90 to 110°C |
(Pressure – 4kg, Dwell Time – 1 Sec)
Viscosity & Solvents
| Printing Viscosity | 14 to 18 Seconds by FCB4 |
| Reducer | Toluene + IPA – 80 + 20 |
| Drying Accelerator | Toluene + IPA – 50 + 50 |
| Drying Retarder | NBA |
Share This Item
Related Products
Quality Assurance
We continually endeavour to follow the highest standards in management and production to ensure the best quality in every batch.
Disclaimer: This information is based on the best of Seven-11 Industries Pvt. Ltd. knowledge and is furnished without warranty, expressed, or implied. The data on this website is related to the specific product designated herein and may not be suitable for combinations with other materials or in processes other than those specifically described herein. Seven-11 Industries assumes no legal responsibility for use or reliance upon these data.